New Modification Mazda RX8 2004

This is a picture of Mazda rx8 modifiikasi made in 2004 with a stylish sports cars and racing modifications. dominated by red paint. make an impression this car into a car that is tough on the field of racing. below is the specification of the modificationMazda rx8 2004.

Modified Mazda RX8 2004 Pictures
specification mazda modified RX 8 2004
*engine modified, rp supercat, greddy sp2 exhaust, racing beat intake system, ap pulley, custom harmon and kardon drive and play setup.
*suspension,tein s tech springs, pettit racing anti-sway bar.
*aloy wheels, axis matrix 19×8 +35 offset
*exterior modified, autobahn front, kenstyle sides and rear, ings +1 spoiler, complete debadge, kei office eyelids, clear corners, rear rotary accent, fender strakes, vleds 6000k hid kit, vleds high output side markers and parking lights, autotechnica grille, tint.
*interior modified, custom interior lighting, custom sub enclosure with two 10″ memphis m class subs.

New Spoon Honda CR-Z

With the additional spare part from Mugen, and other additional modifikator Trifecta has released

Some changes are visible in the picture: Velg, caliper, shock breaker, ECU and exhaust.

MODIFIKASI Audi A8 Razor GTR-10

MODIFIKASI Audi A8 Razor GTR-10

Houses Modification to modify the total German PPI Automotive Audi R8 V10 to produce performance and special appearances. The more exclusive because the car is named PPI Razor GTR-10 was produced limited.

R8 exterior look sharper thanks to the package body kit, including front bumper, side skirts, rear fenders, rear bumper, rear spoiler and diffuser. Lined hood carbon fiber material and air intake hole. Including the back-coated carbon fiber.
In fact, such as doors, roof pillars, side skirts and front bumper made of genuine carbon fiber. The use of this material can contribute up to 250 kg weight reduction.

The use of carbon fiber also spread up into the cabin. Look at the handbrake lever, door protector panel, some of the dashboard, door trim and center console. The chair also thanks to the use of lightweight carbon fiber.

Automatic, weight reduction also contributed to improved performance. Standard V10 engine has been improved strength to 601 PS (previously 525 PS) and peak torque of 565 Nm (previously 529 Nm). With modifications to the R-Tronic transmission, the ability to accelerate from 0-100 lm / hour getting cut, from 3.9 seconds to 3.2 seconds. Maximum speed is also increased from 315 km / h to 335 km / hour.

Forward the overflow of energy to the highway, four-wheel mounted MAG11 PPI aluminum alloy wheels measuring 9x19 inches in front and 12x20 inches in the rear. Velg wrapped in Michelin Pilot Sport 2, 245/35 19 (front) and 325/25 20 (rear)

SPESIFIKASI Toyota Auris

SPESIFIKASI Toyota Auris

Toyota Motor Corporation said it would produce a small hybrid car in the factory Valenciennes, France, in 2012. Principals began to inject an additional investment of funds 53 million euros, or USD 638.5 billion to make it happen.

Toyota is trying to strengthen the hybrid market in the Blue Continent by creating a new model after the success with the Prius. Currently, the factory producing the Yaris in France since 2001 and employs 3,000 people with production capacity of 270,000 units per year.

"We are very grateful to the authorities who have given assistance on this project. Financial aid from central and local governments and local authorities have promoted the implementation of this program," said President Director Makoto Sano Toyota France.

Toyota has started producing hybrid cars Auris in the UK in June. Meanwhile, there has been no announcement about the hybrid model to be produced in France, whether or Yaris Auris. To be sure, the appointment of production location in the City of Blue Wine difficult it will supply the hybrid units to all corners of Europe to the eastern region.

SPESIFIKASI Peugeot | Mobil Sport Listrik

SPESIFIKASI Peugeot | Mobil Sport Listrik

Peugeot has announced details about the EX1. Stylish roadster concept car is 100 percent driven by electricity.

Peugeot EX1 built to celebrate the bicentennial of the French company that. His appearance is very futuristic.

Roadster made with grill design as if seen "floating" with aluminum accents and door reverse model.

Inside, seats covered with leather, while the door trim using materials made from metal. To display unit using a fully digital.

Peugeot power source EX1 comes from two electronic motor that produces 335 hp power with 480 Nm of torque. The manufacturer also uses a system movement wheel all-wheel-drive.

Using a double wishbone front suspension while the rear swingarm which is usually chosen familiar found on a motorcycle. The suspension of this type it is still capable considering the car is made of lightweight carbon fiber material but strong.

Detailed specification of the new Peugeot EX1 is revealed in mat Paris Motor Show later this month, but Peugeot claim EX1 has been successfully posted a record as the fastest electric vehicle on the highway.